100% Original Capricorn XS Series tubing.

It's 100% Creality Original.

Compatible: This CR touch fits for Creality Ender3 v2/Ender3/Ender3 Pro/Ender5/Ender5 Pro/CR-10 with 32 bit v 4.2.2(4.2.7) mainboard. Notice:Just for 32 bit motherboard printers.

Fit for EPAX X1, Anycubic Photon, Wanhao D7, Monoprice Mini SLA and other same size UV LCD 3D Printers.

Compatible with Creality CR-10S Pro, Ender 3, Ender-3 Pro ect. MK8 MK9 MK10 24V Extruder/Hotend etc.

Fit for: Creality Ender 3, Ender 3X, Ender 3 Pro

Our default menu language is in English (Checked by Creality), if your menu is in chinese, please check the second photo, you just need two clicks to change the language without changing any firmware. We are the agent of Creality 3D Printer accessories, so this screen are original from creality

Material: 3D printer wheel made of durable POM wheels, full metal 625zz bearings.

🔮 【Matte Finish】 - PolyTerra PLA is a PLA 1.75 mm filament featuring an incredible matte surface finish which helps hide the layers of your print. PolyTerra PLA comes in more than 20 different colors. Selected color: Mint Light Green PLA filament 1.75mm ( PLA Mint Light Green Filament )

Firmware Download:Please move to the Official Website to download the firmware and flash it at first.(If your mainboard is V1, use isp to flash firmware of V1.1.4 or V1.1.5（8 bit) mainboard, use SD to flash the new Version V4.2.2 or V4.2.7(32 bit) mainboard; if your mainboard is V2, use USB to flash,The circuit wiring of CR-10S,CR-10S4, CR-10S5, CR 20 are different from the manual).

★Quality copper material manufacturing ensuring maximum durability,long service life,fine workmanship

REMOVABLE BUILD SURFACE PLATE: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.

EXCELLENT FLATNESS - The smooth and flat surface is flexible and removable. The PEI sheet can stick to magnetics very well. High strength and heat resistance. (Note: Please remove the transparent protective film on the surface before use).

Drop-in replacement for Wanhao Duplicator i3, Maker Select V1, V2, V2.1 3D printers

1.Compatible with Artillery SW-X1 and other E3D volcano heat block 3D printers.

【Textured PEI + Smooth PEO Magnetic Build Plate】PEI + PEO double-sided printing platform, one side is a smooth PEO platform, the underside of the printed model is smooth and the model is easy to remove and clean. The other side is PEI frosted surface, the frosted sticker surface presents a distinctive frosted touch, provides higher adhesion for the model and pressure without warping.

1【 Huge Curing Space ,Maximum to 350*350*350mm (13*13*13inch)】 Compatible for 15.6 inch or less LCD printer's work to use.395-410nm wavelength（Not for direct resin model,like curing pen or other things directly by a model ）

NEMA 17 stepper motor, up to 45.33oz-in(32Ncm) holding torque, low noise, low step loss and low cost

<b>3D Printer specific firmware pre-flashed on USBasp programmer for all read/write operations.Most other programmers on amazon will error out or refuse to create snapshots on some printers</b>.

Compatibility - Fit for Creality Ender 3/3 Pro/3 v2, Ender 5/5 Plus/ 5 Pro, CR-10/CR-10S/CR-10 S4/CR-10 S5/CR-10 mini, Anet A8, etc. MK7, MK8, MK9 hotend.

High Torque: 5.5 kg-cm, 53.9 N-cm, 76 oz-in, 4.77 lb-in

★Material:Insulation black closed-cell elastic foam and foil,make hot bed heats up faster and retains more heat

This 3D Printer Pulley wheel is transparent. Outer Diameter: 15.3mm. Bore: 5mm. Height: 8.9mm

Excellent Adhesion: Covered by microporous coating, shows strong adhesion in printing. Carbon-silicone construction makes models to be popped off easily after the bed cools down.

Made of solid aluminum material,durable in use

Lime

COMPATIBILITY: Fit for 3D Printer Makerbot Creality CR-10, Anet A8, Tevo Tarantula, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer.

Build Plate for Adventurer 3, Adventurer 3 Lite, Adventurer 3C